FG Series Fluid bed Dryer-bed dryer,fbd dryer,fluid bed dryer manufacturer
Description
Qualipak FG series Fluid bed dryer is the special equipment used extensively in the pharmaceutical industries to reduce the moisture content of pharmaceutical powder and granules. By using powder granulation, Qualipak fluid bed dryer can be used to improve the liquidity and thinner dust. By using powder granulation, to improve solubility property.You will get your mixing, granulation, drying finished in one device.
The fluid bed dryer has been widely used in Pharmaceutical Industry, Foodstuff Industry, Spice Industry, Chemical Industry, etc.
The working principle of this FG series fluid bed dryer is the powder granule in the fluid bed appears in the state of fluidization. It is preheated and mixed with clean and heated air. At the same time, the solution of adhesive is sprayed into the container. It makes the particles become granulating that contains adhesive. Being of unceasing dry through hot air, the moisture in the granulating is evaporated. The process is carried out continuously. Finally, it forms ideal, uniform and porous granules.
Qualipak fluid bed dryer adopts antistatic filtering mediums, that ensure safe operation. Its caking agent atomizer adopts a multi-fluid spray gun to maintain uniform spray particles and to increase the rate of qualified products greatly.
The fluid bed dryer is a no-dead corner equipment that is easy and rapid of feeding or discharging materials and clean of washing to satisfy the GMP standard.
Feature
1.The structure of fluidization bed is round so as to avoid the dead angle.
2.Inside the hopper there is a stirrer in order to avoid agglomeration of raw material and forming canal of flow.
3.The granule is discharged through the method of turning over. In this way it is very convenient. The discharging system can be designed as required, too.
4.It is operated at the condition of negative pressure and seal. The air is filtered. Therefore it is simple in operation and convenient in clean. It is an ideal equipment that is in conformity with the requirements of GMP.
5.The drying speed is fast and the temperature is uniform. In general, the drying time is 15-45 minutes each batch.
6.Use screw to extrude and vibrate granule and granulate the granule with the method of humidity, high speed and mixing
7.Suitable for drying humidity block or powder raw material in the fields such as pharmaceutical, foodstuff, feed stuff, chemical industries and so on
8.The raw material that large in granule and small in block and having adhesive property
9.Suitable for raw materials, its volume will be changed when dry, such as giantarum, polyacrylamide, etc.